JRSGS Forged Eye Grab Hook For Lifting Operations Safety And Reliability

‌The main function of the forged eye-shaped grab hook is to be used for lifting operations, especially in lifting machinery. ‌
The forged eye-shaped grab hook is a kind of sling, suitable for various lifting occasions, with large load capacity and wear resistance. Its design enables it to bear a large weight in lifting operations and perform well during use. In addition, the surface stress concentration parts of the forged eye-shaped grab hook will be non-destructively tested to ensure its safety and reliability during use. ‌
Inspection measures for forged eye-shaped grab hooks ‌Non-destructive testing‌: Non-destructive testing is performed on the parts of the workpiece surface where stress is concentrated. When cracks are found, stop using it immediately and replace it with a new grab hook. ‌Regular inspection‌: Regularly check the wear or corrosion of the dangerous section. When the actual size is less than 95% of the original size, a new grab hook should be replaced. ‌Twist check‌: When the twist of the grab hook body exceeds 10 times the base circle diameter, a new grab hook should be replaced. ‌Opening deformation inspection‌: When the opening deformation of the grab hook reaches 15% of the original size, a new grab hook should be replaced. ‌ ‌Defect handling‌: Defects on the hook are not allowed to be repaired by welding, and dangerous sections or hook handles must not have plastic deformation‌.
These inspection measures ensure the safety and reliability of the forged eye-shaped hook during use and prevent accidents caused by wear, corrosion or structural damage.

forged eye grab hook

forged eye hoist hook

lifting eye grab hook

JRSGS Forged Eye Grab Hook For Lifting Operations Safety And Reliability Images